Product Description:
Advantages and features of ATOS vane pumps
High efficiency and low noise:
Adopting advanced design concepts and precision manufacturing processes to ensure high efficiency of energy conversion and reduce energy loss.
Low noise during operation provides a better working environment for operators.
Smooth flow and high pressure capability:
It can provide very smooth flow output and is suitable for hydraulic systems requiring precision control.
Suitable for high-pressure hydraulic systems and can withstand high-pressure working conditions.
High reliability and long life:
The reinforced structure and high-quality materials enable it to maintain long-term stable operation even under harsh working conditions.
Long working life and can be recycled more than 10⁶ times.
Versatility and wide range of applications:
It can be used in a variety of industrial applications, including construction machinery, agricultural machinery, ships, wind power, etc.
Suitable for hydraulic oil or synthetic fluid, with a variety of displacement options.
Design optimization:
The gap between the stator, rotor and oil distribution plate can be automatically compensated to improve volumetric efficiency.
The 12-blade rotor design with eccentric cancellation structure reduces output pulsation and noise.
Compact design and high power-to-weight ratio:
Compact structure, power-to-weight ratio exceeds 5kW/kg.
Pressure up to 210~300bar, displacement range of 16~150ml/r.
Precautions for use of ATOS vane pump
Installation and steering:
The pump has a specified steering direction, and reverse rotation is not allowed. The rotor blade slot is tilted, the blades are chamfered, and the suction and discharge ports of the oil distribution plate are designed according to the established steering direction.
The oil distribution plate and the stator need to be correctly positioned with locating pins, and the blades, rotors, and oil distribution plates must not be installed upside down.
Oil requirements:
The oil temperature should not exceed 55℃, and the viscosity is required to be between 17~37mm²/s. Excessive viscosity makes it difficult to absorb oil, and too low viscosity will cause serious leakage.
The oil should be well filtered during operation to prevent impurities from entering the pump body.
Clearance and wear:
If the gap between the blades in the blade slot is too large, it will increase leakage, and if it is too small, it will affect the free extension and contraction of the blades, which may cause malfunction.
The suction area of the inner surface of the stator is most susceptible to wear, and it can be reversed if necessary to extend the service life.
Maintenance and inspection:
Regularly check the working status, including oil cleanliness, temperature and replacement cycle.
Regularly replace the hydraulic oil filter to prevent blockage and excessive system pressure.
Keep the hydraulic system clean and prevent impurities from entering the pump body.
Prevent dry running and overload:
Prevent the pump from running dry and overloading, and avoid sucking in air and excessive vacuum.
Disassembly and cleaning:
Pay attention to the cleanliness of the working surface during disassembly and avoid impurities from entering.
Axial clearance has a great influence on volumetric efficiency, which is 0.015~0.03mm for small pumps and 0.02~0.045mm for medium-sized pumps.
By following the above precautions for use, you can ensure the efficient operation and long service life of the ATOS vane pump.
| Operating Temperature | 0-150°F |
| Material | Cast Iron |
| Operating Pressure | 1to 8 bar |
| Standard Or Nonstandard | Standanrd |
| Colour | grey |
| Direction Of Rotation | R : Clckwise (Noral) |
| Usage | Oil |
| Materials | Cast Iron, Stainless Steel, Bronze |
| Flow Range | 180-500L/Min |
| Isplacement Type | constant |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
ATOS PFED-54150 085 1DTO 80 Vane Pump Cast Iron Stainless Steel 100% New Images
|
